Category Archives: Liquid Rubber Coatings

Best Reasons to Use a Liquid EPDM Rubber for Roofs

Posted on by
2

When it comes to roofing materials, it can be difficult for many people who are not professional roofers to understand all of their options. There are many different types of roofing materials available and figuring out which is best and will provide your property with the most protection is not always cut and dry. However, one of the options that stands above the others is Liquid Rubber. While using Liquid EPDM rubber for roofs is not always the best option for all properties, it does offer some great reasons to consider it.

Lower Your Maintenance and Repair Needs

Maintaining a roof and repairing leaks can be time-consuming and costly. However, with this waterproof sealant, things have gotten somewhat easier. You will not have to worry about replacing shingles or worry about metal items being ripped from the roof in the wind. The maintenance for Liquid Rubber tends to be quite easy.

You simply need to head up to the roof a few times per year to make sure it is clear of debris. The coating will protect it from most problems, so you don’t have to worry about leaks, but you will still want to check for any holes or punctures, just in case something blew onto the roof and caused damage. This type of coating can help to cut down your time for maintenance and repairs.

Fast Installation

One of the other stellar reasons to use this type of roofing is that it goes on extremely fast. In a fraction of the time it would take for other types of roofing materials to be installed you can have the Liquid Rubber installed on your roof. You could hire a professional for the installation, or you might want to take care of it on your own. It will often depend on how large the roof is, how much time you have, and how comfortable you are tackling it on your own. Those who have large areas to cover will likely want to have a crew come in and take care of it.

Another great benefit of Liquid Rubber is that this waterproof sealant will start providing protection from water the minute it goes onto your roof. The EPDM rubber has waterproof qualities, and that means it does not even need to cure fully before it provides you with this protection.

Environmentally Friendly

There are some ways in which this waterproof sealant is friendly to the environment, as well. For starters, it tends to be very long lasting, able to provide protection for your roof for decades. This means you will not have to use other materials to keep repairing your roof, essentially cutting down on the number of resources you are using. In addition, you can choose from different colors. The white rubber will help to reflect light to keep the space below cooler in hot climates. The black rubber coating will absorb the light, and it can make the area below warmer. This could help you to reduce your energy usage and the cost of your energy bills.

Say Goodbye to Seam Problems

One of the areas where there are typically problems with a roof are at the seams where roofing materials come together. Even when they are installed properly, small gaps could allow for water to come through and into the roof. This could damage the property and items below. Fortunately, when you use liquid EPDM rubber for roofs, there will not be any seams. It will cover the roof like a skin, providing you with all the protection you need.

EPDM Rubber Coatings vs. Silicone Coatings

Posted on by
Reply

When it comes to choosing the right kind of protective coating for your roof, there are many options. EPDM rubber coatings are one of the most popular options, but you may also come across silicone coatings and wonder, what’s the difference? What makes one better than the other? Or are they the same?

As it turns out, these are related products, but they are not the same. They are both a type of rubber that share a few features, but there are unique things about each that make them better suited to different types of buildings. Here’s what you need to know about each:

EPDM Rubber Coatings Overview

Ethylene Propylene Diene Monomers, or EPDM, is a synthetic rubber of very high density, that is able to withstand extreme temperature changes. Its flexibility and strength make it ideal for buildings that are exposed to both high heats and extreme cold. Industrial building owners like it for its affordability and easy maintenance. It is also flame retardant, UV resistant, and very easy to install. EPDM is also recyclable, so you don’t have to worry about the coating ending up in a landfill in a few decades when it’s time for a replacement.

Silicone Coatings Overview

Silicone is a flexible rubber that is also very flame retardant and able to withstand high heat. It can actually withstand slightly higher heat than EPDM, which makes it ideal for engineering and automotive locations. However, it is not quite as strong as EPDM, which means that it could be damaged by extreme weather and environmental concerns more than EPDM might be. However, silicone is also recyclable, and offers plenty of UV resistance as well. Silicone is also less effective against rain because it doesn’t have good acid or alkali resistance.

So What’s the Difference?

For most applications, EPDM rubber coating and silicone coating won’t be much different. Both allow you to protect your roof from environmental factors, both protect your roof from fire, and both are highly flexible in the face of temperature changes. However, if environmental protection is your main concern, EPDM coating is the better choice – it offers more strength against rain, and is less likely to tear in hail or other strong weather.

But silicone is ideal for areas where extremely high temperatures are the biggest concern. For companies that need to do welding or repair work on the roof regularly, a silicone coating may be the better option to protect the roof better. Both options are long-lived and durable for decades, and neither require a ton of maintenance. Whichever option you do choose will last for a long time barring significant environmental concerns.

Which Coating Should You Choose?

As you can see, which type of coating you choose will depend on your requirements for your roof. It’s essential that you consider what your roof will be used for when choosing the coating material. Once you determine the utility of the roof, then you can consider the factors like price, strength, and resistant properties of the coating.

Understanding the Advantages of Liquid Rubber Roofing

Posted on by
Reply

When it comes to your home, you need to protect it against wear and tear, and you need to make repairs as soon as possible. The single largest area of exposure on your home is the roof. Not only must it contend with constant exposure to temperature fluctuations, but you expect it to deal with intense sunlight, rain, sleet, snow, hail and other threats.

Over time, those can create damage that reduces your roof’s ability to protect you and your family. The good news is that Liquid Rubber roofing can be an ideal solution to your needs. What advantages does this roofing material offer over other options?

The Right Roof

First, understand that Liquid Rubber roofing is not ideal for all residential roofs. Generally, you need a roof with a low pitch (angle), or even a flat roof. Roofs with steeper pitch should make use of sheet metal, slate tiles, or conventional asphalt shingles. With that being said, if your roof has the right pitch, then Liquid Rubber roofing can be quite advantageous.

The Advantages Offered

So, how does liquid rubber roof material stack up against other options on the market? Actually, it holds its own quite well. There are several reasons for this. First, when you apply Liquid Rubber roofing, you create a seamless application. That’s in direct contrast to asphalt shingles, metal roofing and other options. All of these materials are put down in strips or pieces, and then those pieces must be joined. Every joint or seam has the potential to cause leaks down the road.

Another advantage of Liquid Rubber roofing is the quick curing time. With other synthetic rubber roofing options, you might have to wait weeks, even months before the material was fully cured. With Liquid Rubber, that’s not the case. It is fully cured in just days. Moreover, it cures completely at a much lower temperature than other synthetic rubber roofing systems, meaning that it can be installed during the spring, summer or fall. It can even be installed during the winter in areas where wintertime temps are mild.

You’ll find that Liquid Rubber roofing can also be applied to virtually any substrate without having to use a primer. Whether you have a wooden sub-roof, or you’re dealing with concrete or another material entirely, this allows a much faster installation process, and saves you money since you don’t have to purchase primer.

Finally, you’ll find that Liquid Rubber is the only synthetic rubber roofing material on the market that waterproofs immediately. Other products need time to cure and become tacky. The challenge here is that the material is vulnerable until it cures enough to be waterproof. Rain during this time could completely compromise any material installed, washing it away and leading to the need to reapply. With Liquid Rubber, you benefit from immediate waterproofing as soon as the material is applied to the substrate.

As you can see, Liquid Rubber offers quite a few advantages over other roofing materials, and may be the ideal choice for your needs.

DIY EPDM Liquid Rubber Roofing Tips

Posted on by
Reply

You are concerned about your roof. Perhaps you have noticed a leak and need to have it fixed, or perhaps you are simply worried that leaks could be coming soon. Maybe you worry about the damages UV rays are causing to the roof, wearing it down prematurely. Fortunately, there is a way to protect your roof, and you can do it on your own. EPDM Liquid Rubber roofing is an ideal solution for those who want to protect their roof properly. Let’s look at some of the things you can do to get started.

Get Your Tools and Clean the Roof

You will need to have cleaning materials including brooms and wire brushes. In some cases, a pressure washer could be handy, too. You will also need the EPDM Liquid Rubber roofing, as well as rollers and brushes for the application.

Once you have the materials you need, you need to clean the roof properly before you can get started. Start by sweeping off the large debris, but make sure you are very meticulous about getting off as much debris and gunk as possible. In some cases, this could include scrubbing areas with a wire brush just to make sure that you are getting all the loose rust or other materials off. Spray the roof and let it dry.

Apply Wisely

Fortunately, the EPDM Liquid Rubber roofing will go on nice and easy, very much like paint. Apply it with rollers, and brushes in areas that might be hard to reach. When you are applying the coating, be sure that you have enough to cover the entire roof, and that you paint the roof in a manner that still allows you to get down from it safely. The last thing you want to do is paint yourself into a corner.

Something else you will want to consider when you are applying the EPDM Liquid Rubber roofing is the weather. Ideally, you will want to do this in good weather, when it is sunny and in the upper 50s F. This way, it will dry and cure faster. One of the nice things about the coating though is that even if it were to start raining right after you applied it, your roof would still be protected. It would simply take longer to dry and cure.

Is DIY Always the Right Way to Go?

While it is certainly possible to take care of the coating on your own, you might not have the time or the inclination to apply the EPDM Liquid Rubber roofing. In that case, you may want to speak with a roofing specialist in your area who can take care of the application for you instead. You can buy the materials and then just have the specialist take care of the application. Depending on the size of your roof, it should not take long at all. It might not be quite as cost effective as DIY, but it should still be affordable.

Now that you know more about EPDM Liquid Rubber roofing and how you can apply it, get started. It is the perfect way to make sure your roof is safe from leaks and UV rays.

What You Ned to Know About a Liquid Rubber Roof Repair

Posted on by
1

Have you ever heard of liquid rubber roof repair jobs before?

They’re becoming increasingly common for both residential and commercial purposes.

Nonetheless, if you’re unfamiliar with this material and what it can do, make sure you read the following before you have any repairs done on your roof.

What Is Liquid Rubber Roofing?

A liquid rubber roof repair job is done with a material called EPDM. Ethylene propylene diene monomer is a synthetic rubber that is actually used for a number of different reasons.

However, it’s found popularity as a liquid rubber roof repair option for the reasons we’re about to cover.

It can come in solid form, but in this post, we’re only going to talk about its liquid versions. This type is arguably a lot easier to apply and lends itself to smaller applications like minor leaks. That being said, there are liquid EPDM options that can cover entire commercial roofs.

EPDM Is Extremely Strong

A lot of people think that a liquid rubber roof repair material couldn’t possibly offer the same kind of strength they’d find from more traditional versions. After all, the word “liquid” doesn’t necessarily bring up the impression of being very strong.

Nothing could be further from the truth, though. In reality, EPDM is probably one of the strongest options you’ll come across for fixing a roof.

Tests have been done on this amazing liquid that show it’s as good as new after 30 years of protecting a roof. It literally won’t lose any tensile strength after that much time in place.

Now, of course, you need to make sure that EPDM is applied correctly, but as long as it is, you won’t have any problems.

No Temperature Is Too Extreme

One of the first things most people look for when they’re trying to choose a material to repair their roof is what kind of climate it will work in. After all, you’d hate to use something that won’t last through your city’s harshest season.

This doesn’t matter with a liquid rubber roof repair like EPDM, though. Again, it’s been tested time and time again in this regard. All the studies show that you won’t break EPDM until you reach temperatures that no human could survive in to begin with.

It’s a Green Choice

While it wasn’t designed with this purpose in mind, EPDM has recently found a lot of fans because it’s such a green option for repairing roofs.

Much of it is made from recycled materials, so that’s a big win. Then there’s the fact that EPDM locks in your air conditioning or heat, which ensures you don’t have to pay higher utility costs or needlessly increase your carbon footprint.

Even if you’re not especially environmentally conscious, you can’t argue with lower utility bills every month.

If your roof has been damaged and you want it repaired immediately, you should now feel confident in choosing EPDM for the job. This incredible synthetic rubber will get the job done the first time so you don’t have to worry about doing more repairs later.

Liquid Rubber Coatings Work for Residences and Commercial Facilities

Posted on by
Reply

If you have a flat roof for your home or for your business, you will find that one of the best ways to keep your roof safe and secure is with Liquid Rubber coatings. These coatings will work for many different types of roof, but they do need to be flat or almost flat. Whether you have a warehouse space, a factory, an office building or a home, you might want to consider some of the advantages.

Where Can You Use the Liquid Rubber Coatings?

The rubber will adhere to many different types of surfaces, which helps to make it extremely useful. If you have a roof that is made from aluminum, steel, concrete, foam, asphalt or just about any other type of material, you will find that the Liquid Rubber coatings can work very well.

However, you will want to keep in mind that some materials need to have been aged before they will accept the product properly. Copper, for example, needs to have at least five years of weathering. Fiberglass needs to have been aged at least three years. Always check the manufacturer’s specifications to see the materials for which it is best suited, as well as the proper application techniques.

Prevention and Cure

If you have a roof that has never given you any trouble at all, that does not mean you should keep on neglecting it. Instead, use these coatings to provide some protective preventative measures. This will ensure that you do not have to worry about dealing with any type of problem with the roof later, such as leaks. Of course, it you have already noticed leaks, it can help to cure the problem.

Just because you have leaks does not mean you need to replace the roof or call in the pros. As long as you catch them early and there is not extensive damage, you will find that the Liquid rubber coatings can do a very good job of stopping those leaks.

How Does It Work?

The product has been popular for decades, and it works rather simply. It is a liquid that you can apply to the roof with rollers and brushes, just as you would paint. Once you have applied it, the Liquid Rubber coatings start to go to work immediately. It protects after the first five minutes that you put it on the roof. It will start to cure immediately, as long as the temperature is above 55 degrees. Depending on the weather, the time it takes to cure fully can vary.

You do not want to ignore changes in your roof. Just think of all the damage that could be caused by leaks. Instead, take the time to learn more about Liquid rubber coatings and how they can help provide you with the protection and the peace of mind you need. Also, when you are buying, be sure to know the size of your roof so you can purchase enough of the product to cover the entire thing. It will only take one coat.

Tips for Using EPDM Liquid Rubber

Posted on by
3

If you have been searching for a good extra layer of protection for your roof and you have settled on EPDM Liquid Rubber, you have made a good choice. This product has been in use for decades, and it has become very trusted in that time. People have used the product with great success to help protect the roof from things such as leaks and UV radiation. Many like the fact that they can save some money by installing the product on their own rather than hiring a professional.

However, you should still have an idea of what you are doing so you can apply it properly. Make sure you have a roof that is flat or almost flat and that it is made from a material that works with the EPDM Liquid Rubber.

Measure Your Roof

One of the first and most important steps is to measure the size of your roof. This is essential so you know just how much of the product you will need to buy for the application. Keep in mind that you will generally only need to have a single coat for it to work properly.

Get the Tools You Need

Make sure you have all the equipment and tools you will need for each stage of the process. You will want to have a drill, along with a paddle mixer. You need this so you can add and mix the catalyst with the rubber. You should also have a paint roller and brushes. If several people will be helping with the application, make sure they all have brushes or rollers they can use, or else you will have people standing around and doing nothing.

You also need to have tools that you will use to prepare the surface. This could include brooms, wire brushes and rags. You will also want to have some rags and xylene around to clean up any potential messes you might make with the EPDM Liquid Rubber. It will be easy to remove for about four hours after the application.

Prepare the Surface

Once you have the tools you need, you need to prepare the surface. This includes removing all the dirt and debris. Depending on the condition of your roof, you may need to do different things. Some might only need to be swept. Others might need to be pressure washed and scrubbed to remove grit and grime. Once the roof is clean, you need to wait for it to dry completely.

Mix the EPDM Liquid Rubber and Apply

After the roof is dry, you can mix the product and apply it. It goes on very similarly to paint, so you should not have any trouble when it comes to using the rollers and putting it on your roof. It goes on nice and easy and it starts to cure almost immediately, which means it starts to protect right away. One of the things you should remember when you are applying the EPDM Liquid Rubber is to be aware of where you are painting. You never want to paint yourself into a corner where you can’t get off the roof until it dries!

Rubber Roof Coatings Help Alleviate Roof Issues

Posted on by
2

Have you had some issues with your roof lately? Maybe you have an older flat roof on your home or your business, and you worry that it could be leaking or that it has seen better days. You can do some simple things that will help to extend the life of the roof. You can use rubber roof coatings. The Liquid Rubber roofs are easy to install and they will help to keep your roof safe from a host of different issues.

Harmful UV Rays

Over the years, the sun that shines on your roof can cause some issues. The UV rays will eventually cause many different types of roofing material that is common for flat roofs, such as asphalt, to break up and have cracks. These cracks can lead to all sorts of problems. Having the rubber roof coating will help to protect the roof, as it provides UV resistance.

Water Protection

If you have any separated seams in the roof, any holes, or cracks, even if they are small, you will eventually have a leak. Leaks can cause some serious damage to the structural integrity of the roof. It can also cause mold and other unhealthy issues to fester in the building. You want to take precautions against this type of problem and adding the rubber roof coatings is one of the top ways to do it.

Temperature Changes

In most places in the country, the temperatures will vary over the course of the year. If you have low quality materials on the roof, they might not always be capable of handling the temperature changes as the roof can expand and contract somewhat. One of the benefits of Liquid Rubber is that it can change and move with the fluctuations in the building. Even after a long, cold winter, you will still have quality coating come the springtime.

Other Issues

Plenty of other problems might befall your roof. Something could spill on the roof that would normally cause damage. Debris might hit the roof thanks to powerful gusts of wind. All of these various things can damage the roof. However, rubber roof coatings will help to relieve that damage. They are durable and can take quite a bit of punishment. The coatings have the potential to last a long time and to keep your roof in great shape.

With all the benefits that you can find with rubber roof coatings, it is easy to see why they are such a popular option for so many people today. Another one of the things you can appreciate about Liquid Rubber is that you do not have to hire professionals to do the installation. You could do it on your own, as it can go on just like paint with a roller. Of course, if you happen to have a large roof that would take a long time to cover on your own, you may want to enlist some help from friends. You could always hire the pros if you would like, though.

Do Liquid Rubber Coatings Make Good Roofing Options?

Posted on by
Reply

The roof of your home or business is one of the most crucial aspects. It is responsible for shedding rain and snow, protecting the interior from moisture, and also protecting against heat and cold. You obviously want the strongest, longest lasting roofing solution available. Do Liquid Rubber coatings fit the bill? While rubber might not sound like a great choice for roofs at first blush, the reality is that it makes an excellent option.

Multiple Substrates

One reason to choose Liquid Rubber coatings as your roofing repair or replacement option is the broad range of substrates onto which it can be applied. You can add it to sheet metal, including stainless steel. You can apply it to concrete, or to asphalt shingles. You can even apply it to existing rubber roofs, and to asphalt row roofing. With that being said, some roofing substrates will require that you apply a coat of primer first to ensure that the Liquid Rubber adheres correctly.

No More Seam Woes

With any type of metal roof, as well as concrete and other substrates, seams can pose significant problems. Whenever two pieces of a roofing substrate are joined, there is a seam created. All seams have the potential to leak, which is why they must be sealed correctly during the installation. With Liquid Rubber coatings, you don’t have to worry about that. There are no seams. Once the material cures, it forms a solid, seamless, smooth surface that will not leak. This is an ideal solution for any home or business with an existing metal roof, or another type of roofing system with seams.

Long Lifespan

Yes, many types of roofing can offer long lifespans. On average, metal roofing is capable of providing a lifespan of up to 50 years. However, the sheer cost involved with replacing a roof with metal can be exorbitant. With Liquid Rubber coatings, you get robust protection for a long time at a fraction of the cost. Many roofs have withstood 20 years or more (which is significant, considering the material has only been on the market for 26 years).

Low Cost

One of the most appealing factors about using Liquid Rubber coatings for roof repair or roof replacement is the fact that you will spend significantly less. Reroofing can be very costly. Even repairs can be quite expensive. With Liquid Rubber, you’re able to get the protection and durability you need for peace of mind at far less than you would pay for a conventional roof repair or replacement, or even for competing liquid rubber products on the market. Combine that with the fact that Liquid Rubber goes on fast and is immediately waterproof, and you begin to see why it is becoming such a popular option with business owners and homeowners.

Liquid Rubber coatings provide a long lasting solution at a fraction of the price of other options, and can be applied quickly and easily. It’s clear that this is the right choice.

Prepare the Roof for EPDM Rubber Coatings

Posted on by
Reply

One of the nice things about EPDM rubber coatings is the fact that you don’t have to be an expert roofer to apply them. As long as you have some time, the right tools, and the willingness to do it correctly, it is possible to do it on your own in most cases. Of course, if there is a massive roof, you will likely want to hire someone to take care of it for you. However, if the roof is less than 5,000 square feet or so, there’s no reason that one or two people can’t do it on their own.

Plan Your Application Days

While you can technically apply the EPDM rubber coatings in cold temperatures, or in very warm temperatures, you have to keep in mind that they require an ambient temperature of 55 degrees Fahrenheit or greater to cure. Ideally, you will choose a day when it’s sunny and between 70 and 75 degrees Fahrenheit. This ensures that it will be comfortable enough to work, the product can cure, and you won’t have to worry about rain. Before you can get to work though, you need to prepare the roof for the EPDM rubber coatings.

Preparing the Roof

You need to inspect your roof to look for signs of damage. Look for things such as corrosion, gaps, cracks, and tears. If there is rust on the surface of the roof, you can sand it away before you get started. Make repairs to any holes or tears before you apply the EPDM rubber coatings. You also need to clean the roof to remove any grit or grime that might be up there. Clean dirty areas with soap, water, and a stiff-bristled brush. Make sure that you let the roof dry completely before you start to apply the coating of Liquid Rubber. Different types of roofs will require different types of cleaning, naturally.

For example, if you have a concrete roof, there is a chance that it could be too porous for the EPDM rubber coatings to adhere to properly. This doesn’t mean you should give up the idea of these coatings though. First, test out a small patch. Apply the rubber coating and let it cure for about a week. Examine it and look for any indications that it isn’t adhering properly, such as bubbling. If that’s the case, you will want to apply a coat of epoxy onto the concrete first. This will fill in the pores. Let that dry, and then you can use the EPDM rubber coating to cover the roof.

The Application

Once you have prepared the roof, you will find that the application is actually quite simple. You add the catalyst, mix the product according to the instructions, and then use a roller to apply it to the roof. It goes on just like paint, and you will find that it can dry in about the same time. It’s a good and easy solution for those who need to protect their roof.