Common Questions Regarding Liquid Rubber Coatings

Today, many people are choosing to use Liquid Rubber coatings for their roofs that are flat or that have low slopes. They learn about the benefits that the product can offer, and they want to have that protection for their own roof. However, they will still often have quite a few questions regarding the product. The following are some of the questions that many people tend to have with Liquid Rubber coatings.

How Is It Different from the Membrane Version of EPDM?

When it comes to EPDM, there are a couple of options. You could choose the membranes, or you could choose the Liquid Rubber coatings. The materials are essentially the same, but there are some important differences. With the liquid, you will not have to worry about seams, as you would with the membrane sheets. In addition, you will not have to worry about the liquid roof eventually becoming chalky, as it will with the sheets after about eight years or so.

Where Can EPDM Rubber Coatings Be Applied?

You will find that these coatings can be applied in many different locations and on many types of materials. They can be used on metal, rubber membranes, concrete, urethane foam, fiberglass, primed wood, acrylic sheets, foam insulation for popes, and much more. Because it can be used in so many locations, it means that you should not have any trouble putting this on your roof.

How Long Before the Coating Is Waterproof?

With many types of roofing, you need to wait until you have about a week of sunny weather that you can count on before you can apply it. With the Liquid Rubber coating, you will not have this worry. It will become waterproof and protect your roof from the moment that it is applied. Even if it rains just a few hours after installation, your roof will have protection from the water. Of course, it is still going to take several days of dry weather that’s at least 55 degrees F to cure properly.

Do I Need a Professional for the Installation?

When people think of adding a coating to their roof, they immediately think that they are going to need to hire contractors to take care of the job. With this type of coating, that is not the case, though, which is a wonderful benefit. You will find that when you follow the manufacturer’s instructions, it is simple enough that you can apply it on your own. It goes on like paint, and you can use it around pipes, vents, and other areas since it is so flexible and easy to use.

If you have a large roof or you do not want to apply the Liquid Rubber coating on your own, you could always hire someone if you prefer.

How Many Coats Are Needed?

One of the other nice benefits of this type of coating is that you are typically only going to need a single coat. In addition, you do not have to worry about adding a primer for most surfaces, and you will not have to add a top coat. This makes it a fast, efficient, and effective type or roof coating.

Why Are There Two Different Colors Available?

You might have noticed that there are two colors available for the product, black and white. Choosing the color is not about a matter of esthetics, but rather a way to help control the temperatures inside of the building. The black will absorb sunlight and tends to be a good option for those who live in colder areas where it snows. The white reflects the light and is better for those who live in hot areas. It can make it easier to reduce your energy costs during certain times of the year.

Now that you know more about the Liquid Rubber coatings, it is time that you added it to your own roof.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.