The Advantages of EPDM Roofing Solutions

Although you have many methods to choose from when it comes to protecting your roof, each is extremely different from the next. As you probably already know, this isn’t just a decision you can make at random either an you shouldn’t simply go with whatever is cheapest. If you don’t put time and thought into your choice, it will eventually betray you in the form of a leaky roof and all the damage that goes with that. However, if you consider the advantages of an EPDM roofing system, you may still have a very easy decision.

Perfect for Almost All Climates

Some roofing solutions only work in mild or temperate climate. Others can hold up in more severe conditions, but you’ll pay extra for that feature. However, EPDM roofing is perfect in just about any climate, yet still very affordable. Even if temperatures where your building is at reach as low as -40 degrees Fahrenheit, this roofing will not crack or otherwise weaken. Aside from an actual tornado, the elements will generally bounce right off EPDM roofing.

On the other end of the spectrum, EPDM does just as well. This material has been tested at 300 degrees Fahrenheit and was able to hold its own. So no matter how hot it gets where you live or work, EPDM roofing solutions are a good choice.

Energy Efficient

Although EPDM is great for keeping the elements out of your building, it also deserves a lot of credit for how well it can keep hot and cool air in too. This is also a testament to how complete the seal is that it forms over your roof. Whether it’s heat you’re using in the winter or A/C you’re cranking in the summer, neither will escape your building with EPDM on the job.

Low Maintenance

EPDM doesn’t really need much in the way of maintenance. Regular inspections will go a long way toward securing the longevity of this material. Obviously, if you see debris, you’ll want to remove it and there should be a system for draining water from the roof. But other than that, EPDM is perfectly capable of doing its job without a lot of help.

Easy Repairs

Even EPDM roofing isn’t perfect, so eventually—way down the road—you may find yours needs some repairs where a tear or puncture has occurred. “Repair” probably isn’t the right word, though, as all you need to do is put a new patch of the material down and seal it. That’s all there is to it.

Ease of Use

This material is also incredibly easy to install. It’s akin to laying wallpaper on the ground. We already mentioned how easy it was to maintain and repair, but it’s also a simple solution because it will last for decades without issue. Even if you do experience a problem, most installers will offer warranties for 10, 20, or 30 years.

Remember EPDM when it’s time to address the roof of your building. For all the above reasons and more, nothing compares to EPDM roofing solutions.

Need a New Roof? Consider EPDM

Maintaining our roof is the foremost thing to do because it protects our houses directly from the outside weather that can be very harsh. There is one thing to find out whether we need a roof replacement. We can hire a professional in inspecting it for us whether there are some damages to repair or there will be replacement needed. Yet, it is important to make regular inspection visually, especially after bad weather like hard falling snow or downpour rain. Scanning the roof from your binoculars can be the best initial step. Among the indications that we need new roofs include:

• Roof discoloration
• Rotting condition on shingles
• Damage due to termite
• Roof age
• Damage of the interior

Even before finding those signs which are mentioned above, homeowners should consider roof age. The older it is, the higher cost that they will spend. Even they will need a new roof. Replacing new roof should take very deep consideration because homeowners should choose the best roof which will last for years to come. In most cases, the alternative of having new roof can be the wisest option for long term planning.

Choices of roofing materials are varied and homeowners may be a little bit confused in finding the best one. The first consideration can be the durability and the price. It is fine to choose the most affordable one with the best features, but homeowners should also consider the long run planning. Having new roof will be useless when it is not durable enough and needs frequent maintenance—no matter how affordable the price is. The best option can be EPDM roofing in which homeowners will get the best solution of roof which does not leak fast. EPDM roofing’s substance is rubber like and can last for years. Choosing the one from the well reputable company can help in which it is reasonably priced and has good quality. A reputable company will provide the technician during the delivery time so that homeowners or company owners do not find difficulties in installing the roof properly.

The good thing about EPDM roofing is that it is versatile for almost all kinds of buildings. The use of EPDM roofing is increasing and the demand of this product is even higher each passing year. This can be due to its effective protection that can last for decades. Even replacing EPDM roofing is very easy. So, considering EPDM roofing to replace your new roof is strongly recommended.

For product information or ordering Visit http://www.epdmcoatings.com or their facebook page http://www.facebook.com/liquidepdm or call them at 855-281-0940.

Liquid Rubber Benefits

What was once just known and available to industry contractors is now available to residential users too. Liquid Rubber offers a seamless waterproof membrane which is easy to apply and meets the increasing requirements of health, safety and environment considerations in the roofing industry. Liquid rubber can be used in many waterproofing applications and its low cost and versatility has made it one of the most sought after materials in the roofing industry. If you are wondering why people like this material, here are the liquid rubber benefits.

Sound reduction: When this material is applied to buildings with concrete floors, sound would be significantly reduced. The noise reduction would also be felt if the liquid rubber is applied to a metal roof. The material is popularly used in the RV roof repair and stifling the sound of rains by trailer owners.

Heat Reduction: When liquid rubber is applied to the roof, its white color would reduce the transfer of heat to the interior part of a house, vehicle or trailer. This would save you money on your monthly cooling bills, particularly in cooling RV roofs. On the same note, your air conditioner will work for fewer hours, making it to work more efficiently, which reduces maintenance costs. The same benefit can also be seen in houses with pre-existing asphalt roofs that are black in color. The white coating lowers the electricity bills during summer as well as the maintenance costs of the HVAC units.

Waterproofing: Waterproofing benefits of liquid rubber are useful not only in roofing but in flooring too. Water pools cannot penetrate through the liquid rubber coating when it is applied properly. The pools may be swept away or left to dry up.

Rust Reduction: With liquid rubber, you won’t have to strip old roofing material, which makes it perfect for over-coating most substrates such as felt, metal, asphalt, timber, corrugated asbestos and concrete. Moreover, since liquid rubber bonds to substrates completely, it offers the perfect solution for the prevention of rust. Due to its waterproofing property, the liquid rubber coating is usually used to reduce the chances of rust on metal roofing. Some of the structures that can be shielded from rust by applying liquid rubber include RV roofs, metal house roofs, trailers, freestanding garages, awnings and carports.

Long Lasting: Another major benefit of this material is their durability. If you apply the material once, it can last for more than ten years without the addition of more layers. The coating can last more than three times longer compared to other materials.

Ease of Use: Most roof coating materials are a bit difficult to apply and you may be forced to seek the services of a professional. This is where liquid rubber comes in handy. They are very easy to apply such that most DIY buffs can accomplish the task in one day.

Affordable: Liquid rubber offers an affordable option for repairing leaking roofs or preventing the need for general roof maintenance. Moreover, it can extend the lifespan of anything it is applied on.

For product information of Roof Repairing and roof leaking and ordering Visit http://www.epdmcoatings.com or the facebook page http://www.facebook.com/liquidepdm or call them at 855-281-0940.

Addressing the Causes of Ice Dams Prevents Leaks

Ice dams form due to uneven roof heating. That is a simple explanation for a complex interaction involving snow cover, heat loss from a building and temperature changes outdoors.

The problems caused by this complex interaction may include damage to paint or exterior siding and compression of wall installation leading to decreased energy efficiency in a system that is already not operating efficiently. Leaking water can also stain interior ceilings and walls.

Damage to walls or ceilings can be “covered up” with fresh paint. But the dampness can lead to the growth of mold or mildew, which will eventually stain the new paint. Mold and mildew growth in the home is a cause of allergies and other illnesses.

Icicles are a sign that the roof has the potential to form an ice dam. Higher temperatures near the top of the roof cause snow to melt. Overhangs are typically cooler. The melt water freezes. Hanging icicles typically form first. The icicles are sometimes lovely to look at but they are a bad sign for the building owner.

If it snows again, the weight forces the melt water through the roof. That’s why the ice is a major problem of roof leaks. The melt water cannot get past the ice dam as easily as it can get through the roof.

There are several steps you can take to prevent the formation of an ice dam. Some of these steps should be taken before the season’s first snowfall.

An effective attic ventilation system helps in some areas. Mechanical attic ventilation is not a solution in areas where snowfall is heavy. In Minnesota, for example, mechanical air ventilation systems can create additional problems such as moisture in the attic. Natural (non-mechanical) attic ventilation systems are more effective for keeping the attic space dry and preventing heat buildup in the summer.

Any vents or pipes on the roof can be potential problems. Heat will rise from inside the building and through the openings causing uneven melting. Moving vents to the walls of the building is one solution. Additional insulation or weatherproofing at the point where the pipes or vent system passes through the ceiling of the building is another option. The goal is to make the ceilings as air tight as possible.

If you notice that there is uneven melting on the roof or you see icicles hanging on the edge, the immediate step to take is to use a roof rake to get the snow off of the roof. Use caution to avoid taking a fall. A roof rake has a very long extending handle and can be used from the ground in most situations.

If you can see an ice dam, you can hose the area with tap water on a warm day to melt away the ice. You will want to work upward from the lowest edge where the icicles are hanging to create a channel to allow the melt water to escape. This is a temporary solution at best and you can save yourself from future roof repair problems. As soon as the weather clears, you will need to take other measures to prevent heat loss that contributes to ice dam formation.

How to Find a Reputable Roofing Company for Roof Repair

Many homeowners wonder how to find a reputable roofing company. There are a number of disreputable companies out there. Choosing one of them can have painful and expensive results. Here are some things to look for to make sure that you do not choose a disreputable company.

The first thing to look for is a business name, address and phone number. Many of the people who have been scammed by roofers had someone come to their door and offer their “services”. No business card was offered and none was asked for.

Call the phone number and drive by the address to verify that you are dealing with an actual business and not a scammer. Some roofers do work out of their homes. That is not necessarily a problem, as long as you know where to find the contractor if there is a problem.

Ask for references when you are interviewing potential contractors. A good contractor will have good references and will be proud to give you a list. Don’t just take it for granted that the references are legit. Call them.

New roofers are not going to have the experience or training that you need to get the job done right. You want to look for an experienced roofer who has been in business for quite some time. Who was working in roof repair and other roofing issues like leaks repair and roof maintenance. Everyone has to start somewhere but you really don’t want a newbie working on your roof.

Another part of how to find a reputable roofing company is to find out what state licensing is required. Not all states require roofers to have special licenses. If it is required in your state, make sure that the contractor has the appropriate license.

All contractors are required to have a business license. Ask for the owner’s business license number. If he hesitates or cannot provide one, you are probably talking to a disreputable roofer. At the very least, you are talking to someone who is doing business illegally.

An important part of how to find a reputable roofing company is to ask about insurance. The contractor should carry worker’s compensation insurance in case there is an injury to one of the helpers he brings along. Otherwise, you may be held liable for an injury. The contractor should also have general liability insurance to cover damage to your property that can occur during the job.

Those are the basics of how to find a reputable roofing company. A contractor having all of the things mentioned here should get the job done right.

For product information or ordering visit EPDM Coatings or call them at 855-281-0940.

Who Uses Liquid Rubber Coatings?

There are generally two types of groups who choose liquid coating.  The first are those looking for an economical way to extend the life of an existing roof and those building owners who want to save on the installation costs and have their staff apply the material.  There are numerous systems on the market; those requiring a primer base and multiple coats to those needing a fabric reinforcement between coatings.  With Liquid EPDM rubber for most roof types it is a one coat application.  For those with tar or asphalt roofs the ProFlex Primer would be needed.  Let’s take a closer look as some of the properties of the Liquid EPDM rubber and add some of the feedback from our customers.

Easy to work with- Once you mix the catalyst you have a 4 hour pot life more than sufficient to insure a proper application.

Durability-With Liquid EPDM you won’t need to worry about repairing your roof year after year. A one coat application is expected to last 1-16 years before minor touch up’s are needed.  Also since you are only applying one coat the overall weight of your roof is significantly decreased vs. the multiple coat systems.

EPDM is one of the most resilient roofing materials out on the market.  Its ability to expand and contract without fractures occurring is what has made it the choice of roofers around the world.  Now Liquid EPDM provides all those important benefits of sheet EPDM with a few more added benefits.  Since it is a liquid it will gradually “fill in” to the small openings of any roof substrate and leaving behind an airtight seal between the substrate and the coating.  Since it’s a liquid once it cures it will be as if someone put a “one piece” layer of epdm on your roof.  Never worry again about seams coming undone.  Also Liquid EPDM is formulated differently and it will not chalk after 8-9 years.  Our roofing clients appreciate the fact that it waterproofs immediately upon application.  Many times have we received calls from roofers who where in the middle of a job when a rain storm came in.  Yes, an added bonus with the product is that as long as it was applied to a dry surface weather conditions after the fact are not a concern.