Choosing Liquid Rubber for Roof Repair

Do you have a roof in need of repair? Maybe you have already found a leak and you want to nip it in the bud. Perhaps you are worried that there could be leaks in the future, and you want to find a way to head off that possibility before it becomes a problem. You might want to consider getting a coating for the roof. Using Liquid Rubber for roof repair is a fantastic solution.

Of course, you should learn a bit more about the produce and why you should be considering it for your roof. Let’s learn a bit more about Liquid Rubber for roof repair, so you can see why it might be right for you.

What Is the Liquid Rubber?

This is a type of EPDM coating that can be applied to your flat roof. It comes in buckets, and it is like paint once you have mixed it up and it is ready to go. You even apply it to the roof just like paint. You can use rollers and brushes to apply it. However, when this dries and cures, it becomes a rubber barrier that will prevent water from getting through and leaking into your home, workspace, or facility.

How Many Coats Do You Need?

You might be thinking that you would need to add several coats for this to work well and to ensure protection. However, that’s not the case. One of the reasons so many people love to use Liquid Rubber for roof repair and preventative measures is that it will only take a single coat in most cases. This means you will be spending less time working on the roof and more time doing the things you want.

Even with a single coat, you will find that it is very durable. When applied correctly, it can last a long time – decades. The coating can withstand extreme temperatures, as well. In fact, it can hold up to -40F to 300F with no trouble at all. No matter the temperature in your area, you can be sure that this coating is going to last and keep out the leaks.

Once you have applied the coat, it will dry in a couple of hours in most cases. It will cure within about two or three days. Once the Liquid Rubber is on your roof, it is going to keep your building safe from the rain, so you do not have to worry about leaks.

Is It Right for You?

Do you have a commercial property? Do you have a residential property? Regardless, you will find that the Liquid Rubber for roof repair is a good solution for both. The only caveat is that the roof needs to be flat, or nearly flat. Otherwise, the coating will run, not adhere properly, and will not provide adequate protection.

If you are worried about leaks, it is time to consider using Liquid Rubber for roof repair. It is a simple DIY solution that could be right for you.

Why Use Liquid Rubber Roofing

Are you trying to find a roofing product that can truly keep your property safe from rain, leaks, rough weather, and other issues? Those who have a flat roof could consider using Liquid Rubber roofing to take care of their problems. This material has some fantastic benefits that help to make it a stellar choice for your roofing needs. Let’s get a closer look at some of those advantages now.

A Longstanding Reputation

When you are choosing a product for your roofing needs, you want to choose something that has good reviews and that has been around for a while. With Liquid Rubber, you have a product that has been popular for a long time. People have been using EPDM for decades, and it has proven itself to be a great choice for roofing professionals, as well as those who are looking for a DIY roofing option. It can provide the protection your roof needs.

Simple to Apply

One of the nice features of Liquid Rubber roofing is the fact that it is so simple to apply to your roof. You can do it with a paint roller, along with some brushes to get around tight spots if needed. It is just as easy as putting on a coat of paint. You only need to use one coat of the Liquid Rubber, as well.

Whether you are putting the coating on your roof at home or a workspace that you own, or even a large commercial space, it will be fast and easy. You can do it on your own, too, which can save you some money.

In most cases, the product will dry in a couple of hours, and it will be fully cured within about two to three days. However, you do want to make sure that you are applying the product on days when it is not raining and the temperature is above 55 F. As soon as the Liquid Rubber is on the roof, it can provide you with protection against the elements, even before it has fully dried.

It Can Handle Temperature Changes

Do you live in an area that has summers that get quite hot, or an area that has some frigid winters? If you do, using a low-quality coating on your roof is a terrible idea. The poor-quality coatings are not often able to handle the changes in temperature. They tend to crack. If they crack, they will not do you much good when it comes to protection from water damage. A great coating, such as Liquid Rubber, can expand and contract with the fluctuations in the temperature. This means you do not have to worry about those cracks.

No More Leaks

Of course, one of the biggest and best reasons to use Liquid Rubber is the fact that it can take care of any leaks that you might have now, and prevent future leaks from occurring. It provides you with that added layer of protection you need, and is a fantastic way to keep your roof safe.

DIY EPDM Liquid Rubber Roofing Tips

You are concerned about your roof. Perhaps you have noticed a leak and need to have it fixed, or perhaps you are simply worried that leaks could be coming soon. Maybe you worry about the damages UV rays are causing to the roof, wearing it down prematurely. Fortunately, there is a way to protect your roof, and you can do it on your own. EPDM Liquid Rubber roofing is an ideal solution for those who want to protect their roof properly. Let’s look at some of the things you can do to get started.

Get Your Tools and Clean the Roof

You will need to have cleaning materials including brooms and wire brushes. In some cases, a pressure washer could be handy, too. You will also need the EPDM Liquid Rubber roofing, as well as rollers and brushes for the application.

Once you have the materials you need, you need to clean the roof properly before you can get started. Start by sweeping off the large debris, but make sure you are very meticulous about getting off as much debris and gunk as possible. In some cases, this could include scrubbing areas with a wire brush just to make sure that you are getting all the loose rust or other materials off. Spray the roof and let it dry.

Apply Wisely

Fortunately, the EPDM Liquid Rubber roofing will go on nice and easy, very much like paint. Apply it with rollers, and brushes in areas that might be hard to reach. When you are applying the coating, be sure that you have enough to cover the entire roof, and that you paint the roof in a manner that still allows you to get down from it safely. The last thing you want to do is paint yourself into a corner.

Something else you will want to consider when you are applying the EPDM Liquid Rubber roofing is the weather. Ideally, you will want to do this in good weather, when it is sunny and in the upper 50s F. This way, it will dry and cure faster. One of the nice things about the coating though is that even if it were to start raining right after you applied it, your roof would still be protected. It would simply take longer to dry and cure.

Is DIY Always the Right Way to Go?

While it is certainly possible to take care of the coating on your own, you might not have the time or the inclination to apply the EPDM Liquid Rubber roofing. In that case, you may want to speak with a roofing specialist in your area who can take care of the application for you instead. You can buy the materials and then just have the specialist take care of the application. Depending on the size of your roof, it should not take long at all. It might not be quite as cost effective as DIY, but it should still be affordable.

Now that you know more about EPDM Liquid Rubber roofing and how you can apply it, get started. It is the perfect way to make sure your roof is safe from leaks and UV rays.

What You Ned to Know About a Liquid Rubber Roof Repair

Have you ever heard of liquid rubber roof repair jobs before?

They’re becoming increasingly common for both residential and commercial purposes.

Nonetheless, if you’re unfamiliar with this material and what it can do, make sure you read the following before you have any repairs done on your roof.

What Is Liquid Rubber Roofing?

A liquid rubber roof repair job is done with a material called EPDM. Ethylene propylene diene monomer is a synthetic rubber that is actually used for a number of different reasons.

However, it’s found popularity as a liquid rubber roof repair option for the reasons we’re about to cover.

It can come in solid form, but in this post, we’re only going to talk about its liquid versions. This type is arguably a lot easier to apply and lends itself to smaller applications like minor leaks. That being said, there are liquid EPDM options that can cover entire commercial roofs.

EPDM Is Extremely Strong

A lot of people think that a liquid rubber roof repair material couldn’t possibly offer the same kind of strength they’d find from more traditional versions. After all, the word “liquid” doesn’t necessarily bring up the impression of being very strong.

Nothing could be further from the truth, though. In reality, EPDM is probably one of the strongest options you’ll come across for fixing a roof.

Tests have been done on this amazing liquid that show it’s as good as new after 30 years of protecting a roof. It literally won’t lose any tensile strength after that much time in place.

Now, of course, you need to make sure that EPDM is applied correctly, but as long as it is, you won’t have any problems.

No Temperature Is Too Extreme

One of the first things most people look for when they’re trying to choose a material to repair their roof is what kind of climate it will work in. After all, you’d hate to use something that won’t last through your city’s harshest season.

This doesn’t matter with a liquid rubber roof repair like EPDM, though. Again, it’s been tested time and time again in this regard. All the studies show that you won’t break EPDM until you reach temperatures that no human could survive in to begin with.

It’s a Green Choice

While it wasn’t designed with this purpose in mind, EPDM has recently found a lot of fans because it’s such a green option for repairing roofs.

Much of it is made from recycled materials, so that’s a big win. Then there’s the fact that EPDM locks in your air conditioning or heat, which ensures you don’t have to pay higher utility costs or needlessly increase your carbon footprint.

Even if you’re not especially environmentally conscious, you can’t argue with lower utility bills every month.

If your roof has been damaged and you want it repaired immediately, you should now feel confident in choosing EPDM for the job. This incredible synthetic rubber will get the job done the first time so you don’t have to worry about doing more repairs later.

Liquid Rubber Coatings Work for Residences and Commercial Facilities

If you have a flat roof for your home or for your business, you will find that one of the best ways to keep your roof safe and secure is with Liquid Rubber coatings. These coatings will work for many different types of roof, but they do need to be flat or almost flat. Whether you have a warehouse space, a factory, an office building or a home, you might want to consider some of the advantages.

Where Can You Use the Liquid Rubber Coatings?

The rubber will adhere to many different types of surfaces, which helps to make it extremely useful. If you have a roof that is made from aluminum, steel, concrete, foam, asphalt or just about any other type of material, you will find that the Liquid Rubber coatings can work very well.

However, you will want to keep in mind that some materials need to have been aged before they will accept the product properly. Copper, for example, needs to have at least five years of weathering. Fiberglass needs to have been aged at least three years. Always check the manufacturer’s specifications to see the materials for which it is best suited, as well as the proper application techniques.

Prevention and Cure

If you have a roof that has never given you any trouble at all, that does not mean you should keep on neglecting it. Instead, use these coatings to provide some protective preventative measures. This will ensure that you do not have to worry about dealing with any type of problem with the roof later, such as leaks. Of course, it you have already noticed leaks, it can help to cure the problem.

Just because you have leaks does not mean you need to replace the roof or call in the pros. As long as you catch them early and there is not extensive damage, you will find that the Liquid rubber coatings can do a very good job of stopping those leaks.

How Does It Work?

The product has been popular for decades, and it works rather simply. It is a liquid that you can apply to the roof with rollers and brushes, just as you would paint. Once you have applied it, the Liquid Rubber coatings start to go to work immediately. It protects after the first five minutes that you put it on the roof. It will start to cure immediately, as long as the temperature is above 55 degrees. Depending on the weather, the time it takes to cure fully can vary.

You do not want to ignore changes in your roof. Just think of all the damage that could be caused by leaks. Instead, take the time to learn more about Liquid rubber coatings and how they can help provide you with the protection and the peace of mind you need. Also, when you are buying, be sure to know the size of your roof so you can purchase enough of the product to cover the entire thing. It will only take one coat.

Prepare the Roof for EPDM Rubber Coatings

If you have been considering EPDM rubber coatings for your roof, you have probably learned that it is easy to apply. This is one of the biggest benefits of the product. People can put it on their roof at their home or business, on their own, and without spending a fortune on a roofer. Of course, they need to have a roof that is flat or almost flat for the product, and if they are applying it to a large area, they still might find that it is easier to work with the professionals. For the most part though, the EPDM rubber coatings will be easy to install.

You do need to make sure you are prepared and that your roof is prepared for the process though. Fortunately, it is easy.

Know the Weather

One of the first and most important things you need to do is check the weather. This is something that many people never even think about. Naturally, you want to apply the EPDM rubber coatings when the weather is nice outside. It is easier on you as you are applying it, and it will cure faster. Even though you can apply it when it is cold, and it will start to cure, when you have some nice warm temperatures, it will be better. Try to aim for anything above 55 degrees. However, in the mid-70s is even better.

Prep the Roof

The next thing you need to do is prepare the roof for the installation. You will want to look for signs of obvious damage after cleaning off any initial debris. Some of the things you will be looking for on the roof include tears, gaps between the seams, cracks, or areas of corrosion. If you have a metal roof and you notice rust, take the time to remove it before you apply your EPDM rubber coatings, just because it will allow them to adhere better. Clean off the entire roof with water and scrub any areas that seem particularly dirty. Then, when everything has dried appropriately, you can start the application

Apply the Material

After the roof is clean and dry, you will get your materials ready to apply. Make sure you have measured your roof and that you have bought enough of the EPDM rubber coating material to cover the roof area entirely. Mix it up according to the instructions provided by the manufacturer, and then you can apply it like you would paint. Use rollers for the large areas and use brushes for any areas that need more of a delicate touch.

The preparation for the EPDM rubber coatings is relatively simple, but depending on the size and the condition of you roof, it can be time consuming. If you have a roof that is quite large, you might want to enlist some help in completing the project. Most people will find that on residential roofs and small commercial roofs, they can take care of everything on their own.

Tips for Using EPDM Liquid Rubber

If you have been searching for a good extra layer of protection for your roof and you have settled on EPDM Liquid Rubber, you have made a good choice. This product has been in use for decades, and it has become very trusted in that time. People have used the product with great success to help protect the roof from things such as leaks and UV radiation. Many like the fact that they can save some money by installing the product on their own rather than hiring a professional.

However, you should still have an idea of what you are doing so you can apply it properly. Make sure you have a roof that is flat or almost flat and that it is made from a material that works with the EPDM Liquid Rubber.

Measure Your Roof

One of the first and most important steps is to measure the size of your roof. This is essential so you know just how much of the product you will need to buy for the application. Keep in mind that you will generally only need to have a single coat for it to work properly.

Get the Tools You Need

Make sure you have all the equipment and tools you will need for each stage of the process. You will want to have a drill, along with a paddle mixer. You need this so you can add and mix the catalyst with the rubber. You should also have a paint roller and brushes. If several people will be helping with the application, make sure they all have brushes or rollers they can use, or else you will have people standing around and doing nothing.

You also need to have tools that you will use to prepare the surface. This could include brooms, wire brushes and rags. You will also want to have some rags and xylene around to clean up any potential messes you might make with the EPDM Liquid Rubber. It will be easy to remove for about four hours after the application.

Prepare the Surface

Once you have the tools you need, you need to prepare the surface. This includes removing all the dirt and debris. Depending on the condition of your roof, you may need to do different things. Some might only need to be swept. Others might need to be pressure washed and scrubbed to remove grit and grime. Once the roof is clean, you need to wait for it to dry completely.

Mix the EPDM Liquid Rubber and Apply

After the roof is dry, you can mix the product and apply it. It goes on very similarly to paint, so you should not have any trouble when it comes to using the rollers and putting it on your roof. It goes on nice and easy and it starts to cure almost immediately, which means it starts to protect right away. One of the things you should remember when you are applying the EPDM Liquid Rubber is to be aware of where you are painting. You never want to paint yourself into a corner where you can’t get off the roof until it dries!

Rubber Roof Coatings Help Alleviate Roof Issues

Have you had some issues with your roof lately? Maybe you have an older flat roof on your home or your business, and you worry that it could be leaking or that it has seen better days. You can do some simple things that will help to extend the life of the roof. You can use rubber roof coatings. The Liquid Rubber roofs are easy to install and they will help to keep your roof safe from a host of different issues.

Harmful UV Rays

Over the years, the sun that shines on your roof can cause some issues. The UV rays will eventually cause many different types of roofing material that is common for flat roofs, such as asphalt, to break up and have cracks. These cracks can lead to all sorts of problems. Having the rubber roof coating will help to protect the roof, as it provides UV resistance.

Water Protection

If you have any separated seams in the roof, any holes, or cracks, even if they are small, you will eventually have a leak. Leaks can cause some serious damage to the structural integrity of the roof. It can also cause mold and other unhealthy issues to fester in the building. You want to take precautions against this type of problem and adding the rubber roof coatings is one of the top ways to do it.

Temperature Changes

In most places in the country, the temperatures will vary over the course of the year. If you have low quality materials on the roof, they might not always be capable of handling the temperature changes as the roof can expand and contract somewhat. One of the benefits of Liquid Rubber is that it can change and move with the fluctuations in the building. Even after a long, cold winter, you will still have quality coating come the springtime.

Other Issues

Plenty of other problems might befall your roof. Something could spill on the roof that would normally cause damage. Debris might hit the roof thanks to powerful gusts of wind. All of these various things can damage the roof. However, rubber roof coatings will help to relieve that damage. They are durable and can take quite a bit of punishment. The coatings have the potential to last a long time and to keep your roof in great shape.

With all the benefits that you can find with rubber roof coatings, it is easy to see why they are such a popular option for so many people today. Another one of the things you can appreciate about Liquid Rubber is that you do not have to hire professionals to do the installation. You could do it on your own, as it can go on just like paint with a roller. Of course, if you happen to have a large roof that would take a long time to cover on your own, you may want to enlist some help from friends. You could always hire the pros if you would like, though.

Do Liquid Rubber Coatings Make Good Roofing Options?

The roof of your home or business is one of the most crucial aspects. It is responsible for shedding rain and snow, protecting the interior from moisture, and also protecting against heat and cold. You obviously want the strongest, longest lasting roofing solution available. Do Liquid Rubber coatings fit the bill? While rubber might not sound like a great choice for roofs at first blush, the reality is that it makes an excellent option.

Multiple Substrates

One reason to choose Liquid Rubber coatings as your roofing repair or replacement option is the broad range of substrates onto which it can be applied. You can add it to sheet metal, including stainless steel. You can apply it to concrete, or to asphalt shingles. You can even apply it to existing rubber roofs, and to asphalt row roofing. With that being said, some roofing substrates will require that you apply a coat of primer first to ensure that the Liquid Rubber adheres correctly.

No More Seam Woes

With any type of metal roof, as well as concrete and other substrates, seams can pose significant problems. Whenever two pieces of a roofing substrate are joined, there is a seam created. All seams have the potential to leak, which is why they must be sealed correctly during the installation. With Liquid Rubber coatings, you don’t have to worry about that. There are no seams. Once the material cures, it forms a solid, seamless, smooth surface that will not leak. This is an ideal solution for any home or business with an existing metal roof, or another type of roofing system with seams.

Long Lifespan

Yes, many types of roofing can offer long lifespans. On average, metal roofing is capable of providing a lifespan of up to 50 years. However, the sheer cost involved with replacing a roof with metal can be exorbitant. With Liquid Rubber coatings, you get robust protection for a long time at a fraction of the cost. Many roofs have withstood 20 years or more (which is significant, considering the material has only been on the market for 26 years).

Low Cost

One of the most appealing factors about using Liquid Rubber coatings for roof repair or roof replacement is the fact that you will spend significantly less. Reroofing can be very costly. Even repairs can be quite expensive. With Liquid Rubber, you’re able to get the protection and durability you need for peace of mind at far less than you would pay for a conventional roof repair or replacement, or even for competing liquid rubber products on the market. Combine that with the fact that Liquid Rubber goes on fast and is immediately waterproof, and you begin to see why it is becoming such a popular option with business owners and homeowners.

Liquid Rubber coatings provide a long lasting solution at a fraction of the price of other options, and can be applied quickly and easily. It’s clear that this is the right choice.

What You Should Know about Applying EPDM Rubber Roof Compound

EPDM rubber roof compound offers a significant number of benefits when compared to competing rubber products on the market, as well as to conventional roofing substrates. It’s long lasting, affordable, and incredibly durable. It also provides significant resistance to heat and cold, doesn’t crack or flake, and can be used with almost any substrate out there. Of course, you’ll need to know a few things about installing/applying the compound to your roof.

Tools You’ll Need

If your roof is 5,000 square feet or less, you can get the job done with just hand tools. However, if your roof is larger than this, you may want to use an airless sprayer to apply the EPDM rubber roof compound. This will take less time than attempting to apply it by hand. Note that you should never use an air-powered sprayer, though, as this can cause problems with the application by creating air bubbles in the rubber.

In terms of hand tools, you’ll only need a few. You will definitely need a squeegee with a long handle (a broom handle works well). You will also need a paint roller with a long handle, as well as an electric drill. For cleanup, you’ll want some mineral spirits on hand.

Prep Prior to Applying

Before you can apply EPDM rubber roof compound, you’ll need to do a little bit of prep work. Inspect the roof and make sure that there are no repairs needed to the substructure. Any repairs needed should be handled before applying the compound. Once the repairs are completed (if necessary), you’ll just need to clean the roof and make sure that all debris is removed. If your roofing substrate is not compatible with direct application of EPDM roofing compound, you’ll need to apply a coat of primer, as well.

Temperature Considerations

Note that you can apply EPDM rubber roof compound at any temperature. However, it will not begin curing until the temperature reaches at least 55 degrees F. The warmer the exterior temperature is, the faster the curing will proceed. With that being said, the EPDM compound is waterproof as soon as you apply it to the roof. It will not leak if it rains, even if the curing process is not completed. You also don’t need to worry about the temperature dipping below 55 degrees at night – curing will proceed once the temperature rises above the 55-degree mark the next day.

Application Time

Once you mix the catalyst into the compound, you have about four hours during which to apply the EPDM rubber roof repair material. It’s highly recommended that you only mix one bucket at a time to ensure that you have ample time to apply it before curing starts.

EPDM rubber roof is an ideal solution for homes and businesses in need of roofing repair, but can also be applied to the entire roof, effectively providing a completely new roof that will last for decades.