Tips for Using EPDM Liquid Rubber

If you have been searching for a good extra layer of protection for your roof and you have settled on EPDM Liquid Rubber, you have made a good choice. This product has been in use for decades, and it has become very trusted in that time. People have used the product with great success to help protect the roof from things such as leaks and UV radiation. Many like the fact that they can save some money by installing the product on their own rather than hiring a professional.

However, you should still have an idea of what you are doing so you can apply it properly. Make sure you have a roof that is flat or almost flat and that it is made from a material that works with the EPDM Liquid Rubber.

Measure Your Roof

One of the first and most important steps is to measure the size of your roof. This is essential so you know just how much of the product you will need to buy for the application. Keep in mind that you will generally only need to have a single coat for it to work properly.

Get the Tools You Need

Make sure you have all the equipment and tools you will need for each stage of the process. You will want to have a drill, along with a paddle mixer. You need this so you can add and mix the catalyst with the rubber. You should also have a paint roller and brushes. If several people will be helping with the application, make sure they all have brushes or rollers they can use, or else you will have people standing around and doing nothing.

You also need to have tools that you will use to prepare the surface. This could include brooms, wire brushes and rags. You will also want to have some rags and xylene around to clean up any potential messes you might make with the EPDM Liquid Rubber. It will be easy to remove for about four hours after the application.

Prepare the Surface

Once you have the tools you need, you need to prepare the surface. This includes removing all the dirt and debris. Depending on the condition of your roof, you may need to do different things. Some might only need to be swept. Others might need to be pressure washed and scrubbed to remove grit and grime. Once the roof is clean, you need to wait for it to dry completely.

Mix the EPDM Liquid Rubber and Apply

After the roof is dry, you can mix the product and apply it. It goes on very similarly to paint, so you should not have any trouble when it comes to using the rollers and putting it on your roof. It goes on nice and easy and it starts to cure almost immediately, which means it starts to protect right away. One of the things you should remember when you are applying the EPDM Liquid Rubber is to be aware of where you are painting. You never want to paint yourself into a corner where you can’t get off the roof until it dries!