How to Repair Roof Leaks

There is nothing more irritating than sitting in your favorite chair, only to suddenly have water dripping on your head. Once you find that special bucket to protect your floors and furniture, your next task will be locating the source. After that, you’re ready to take on the task of repairing roof leaks – obviously after the rain has stopped and it is safe to do so. First, though, you need to know the basics of addressing leaks on different kinds of roofs.

Asphalt Shingles

When handling roof leaks on asphalt shingles, your first step is to decide whether the problem is due to the roof’s age or excessive damage. Head over to the sunny side of your roof and try to bend the corners on a few different shingles. If the corners break without flexing, it’s likely time for a new roof. If the source of the leak is a small tear, a loose nail, or a hole, you can easily fix those. You can also fix roof leaks that are due to a single loose or missing shingle, but if there are many different shingles showing considerable damage, you’ll need to call a professional about replacing your roof.

Built-Up Roof Leaks

Built-up roofs are very durable, but they can develop leaks. In most cases, these will be in areas where different sections connect, around the flashing, under the eaves, or around the chimney. Leaks can also occur if there are areas where a large amount of gravel is missing, in blistered areas, and due to separation between the bitumen and felt. If simple repairs, such as keeping gravel covering the surface and sealing holes, don’t fix the roof leaks, you will need to contact a professional about fixing them – unless you are ready to handle hot mapping asphalt on your own.

Metal Roofing

If you need to fix roof leaks in metal roofing, you may be able to deal with small repairs such as replacing loose nails. If you find areas of rust, you can remove them using a wire brush, prime the area, and touch up the area. If there are holes, you can usually address small ones with roof cement. However, if there are flashing problems, or you are not experienced with working with metal, your best bet is going to be calling in a professional to help you repair the leaks.

Wood Shingles

If you have wood shingles, you can easily check for any cracked, split, or lifted shingles. In most cases, these are fairly easy to replace on your own, provided that there aren’t large areas of damage. When you nail down lifted shingles, or replace loosened nails, just make sure to seal them with the appropriate roofing cement. If there is considerable damage, or your roof has a very steep pitch, you should let the professionals handle the problem.
Fixing small roof leaks is often a do-it-yourself job, provided that you’re comfortable with the height and pitch, and provided that you have the appropriate safety gear. If you have any concerns, or the problem is larger than a few shingles, call the experts so you don’t run into even more problems.

The Benefits of Liquid Rubber Floor Coatings

When most people think of floor coatings, the first options that come to mind are typically concrete or wood. There is, however, another option that can provide a wealth of benefits over these options. Liquid rubber floor coatings are a great option for those looking for a floor that is both versatile and durable.

Liquid Rubber EPDM and Floors

While EPDM liquid rubber is often used for sealing roofs, it also makes an excellent option for the floor as well. The material starts out as a liquid during the application process, which allows it to reach into all areas being covered. After it cures, it becomes an elastomer, which simply means it has elastic abilities that allow it to stretch and give. This combination creates the perfect surface for flooring in a few different ways.

Durability

With any flooring solution, the most important consideration is durability, especially in areas such as garages, workshops, or factory floors. Liquid rubber floor coatings create an excellent bond with the substrate beneath it, making a nearly impenetrable covering. When you consider that roofs that are sealed with EPDM liquid rubber typically last for a minimum of 30 years without showing signs of wear in even the harshest weather conditions, you can see how this would benefit you as a flooring option.

Resistance

Liquid rubber floor coatings also provide protection that most concrete just can’t do all that well. Factories and workshops are often filled with harsh chemicals, excessive foot traffic, and even spills. Liquid rubber resists all of these, as well as bacteria, helping to provide extreme durability – without having to worry about those chemicals removing the finish, which is commonly seen with traditional concrete flooring.

Low Maintenance

Another important benefit of using rubber for flooring is that it requires very little maintenance. Obviously, you will want to clean up spills, and occasionally give it a cleaning to keep it looking its best, but you won’t have to put in the effort required for other materials. Eliminating the need for buffing and waxing will save money, and make sure you don’t have to pull people off of other important jobs to handle it.

Lower Costs

Liquid rubber floor coatings only require one coat, and after thoroughly cleaning the existing surface, it can be applied directly over it. This means you are not only saving on the amount of materials needed to complete the job, you also won’t have to shut your business down for long periods to have the old flooring removed, just to wait even longer for the new flooring to go down.

If you are considering your options for flooring, whether in a factory, garage, boat, RV, or other area, liquid rubber coatings provide a wealth of benefits over the other options available. You will also notice a difference walking on your new floors, as the rubber will absorb the impact, helping to make standing and walking more comfortable as well. If you haven’t considered liquid rubber, it might be time to do so if you want to increase durability, resistance, and versatility, all while minimizing costs.