EPDM Roofing Explained

Nowadays, there are more roofing solutions than ever before. Many are practically the same and there are plenty that should never garner much attention. However, EPDM roofing is different from those other options. This roofing solution has become one of the most popular in the world thanks to its affordability, durability and overall quality. If you’re in the market for a new roofing solution, then, don’t forget to consider what this one can bring to the table.

What Is EPDM Roofing?

This roofing solution is a synthetic rubber that covers the entirety of your roof, forming a durable membrane that keeps the elements on the outside where they belong. However, while there’s no questioning its strength, you don’t have to worry that an EPDM roofing system is going to add a dangerous amount of weight onto your structure. EPDM generally weighs about 1/3 a pound per square foot. Just about any building out there is a candidate for EPDM, thanks to how lightweight it is.
The two main ingredients in EPDM are propylene and ethylene (EPDM stands for Ethylene Propylene Diene Monomomer), which are derived from natural gas and oil. There are a number of different types of EPDM to choose from, however, your color selection is largely limited to just black and white. Thicknesses are also limited to just 45 or 60 mils. Nonetheless, this will still give you plenty to work with where your roofing needs are concerned.

Easy Installation

Another advantage that comes with EPDM roofing solutions is how easy they are to install. You could probably handle the process on your own and save a few bucks, but given how simple the process is, you won’t need to spend a lot of time or money paying a company to put EPDM on your roof.
EPDM is generally rolled out over your existing roof and then adhered to the structure, mechanically attached or ballasted. While some seams will remain visible, they will essentially be glued down so that no elements can sneak between them and cause problems for you. On top of that, sheets of EPDM are usually overlapped over one another, for even better protection.

Simple Repairs

Nothing is perfect, not even EPDM roofing, meaning problems may arise down the line. The good news is that EPDM couldn’t be easier to repair. Unlike other options you may be considering, you never have to worry that problems with this roofing will mean you have to uproot the entire application and start all over.
As EPDM roofing relies on sheets that get applied to the roof, they can just as easily be ripped up as necessary and replaced. Just like installation didn’t take much time or money, you can expect the same from replacing EPDM too.
Given how reliable EPDM roofing it is, don’t be surprised to find out that most warranties for the product are for well over 20 years. This, despite the fact that your choice in roofing is already going to be better than most others on the market. Simply put, nothing can compare to EPDM.

Always Go with EPDM Roof Coatings

If you’re looking to improve your commercial building, one of the smartest things you can do is address the roof. A roof that isn’t working properly virtually guarantees all kinds of problem later on. Yet, something like roof coatings don’t take nearly as much time as installing new floors, painting the inside or outside or other renovations people often do in order to get more from their commercial building. However, don’t go with just any type of roof coating. Make sure you choose EPDM instead.

Easy to Apply

Despite the many benefits EPDM roof coatings have become known for, it might be one of the easiest options on the market to actually apply. It’s so easy, in fact, that you may even feel up to the task yourself. This is why many people consider EPDM roof coatings to be a DIY (Do It Yourself) option.

Even if you decide to pay someone else to handle this project for you, a professional will need even less time to complete the job. As such, you can also look forward to a relatively small bill for the labor involved. Fortunately, EPDM is a fairly affordable chemical as well, meaning the whole thing should be easy to budget for.

Strong and Long Lasting

Now, if all we could say about EPDM roof coatings were that they were easy to apply, that wouldn’t be very confidence inspiring. Plenty of options can be easily installed, that doesn’t mean you should go with them, even if they are affordable.

Consider, though, that EPDM can also last for 20 years, easily. The only maintenance it ever needs is some minor cleaning, which is something every roof needs anyway.

Yet, EPDM has been tested and shown to withstand the most merciless of temperatures. Studies have found that it has no problem at 300 degrees Fahrenheit all the way down to -30. This kind of durability should be more than enough for your purposes.

Of course, liquid EPDM is also great because of how well it can fend off rain, sleet and snow. The finished product has no seams for any liquid or debris to sneak between. This impenetrable membrane may be the last coating your roof ever needs.

Multi-Purpose

One really great thing about using EPDM is that it can be used on just about any type of roofing you may have. The right roof coating manufacture will have a form of EPDM that will work best for the material on top of your building, whether it’s metal, fiberglass, concrete, asphalt or even some shingles.

Works for Repairs and Proactive Steps

You can use EPDM for more than just roof restoration too. Long before you ever experience any problems, consider how this form of rubber can be used to coat your roof too, in order to ensure you never have any major issues to worry about. While repairs and renovations may take a little more work in order to get the job done, you’ll still find the entire project fast and affordable.

Don’t trust your roof to anything but EPDM. For roof coatings and more, it’s a miracle material that lives up to its promise.